Uwell Crown III Review – The King Of Sub-Ohm Tanks

Box Contents

The Uwell Crown III comes in a clear plastic box that lets you see right through to the goodies inside. Once you open the box up you’ll find:

  • Uwell Crown III Tank
  • Replacement Quartz Glass Tank
  • 0.25 Ω Coil
  • 0.5 Ω Coil
  • Replacement Rubber O-Rings
  • Uwell Crown Key

The Uwell Crown III comes preinstalled with the 0.25 Ω coil. I prefer to vape at lower resistances so I kept it in, but you can swap it to the 0.5 Ω coil if you like. The Uwell Crown III also comes with a little Crown shaped key that you’ll need if you ever want to take off the glass and clean the thing out. You won’t need it to fill the tank, but you should definitely keep it somewhere safe.


Build Quality & Overview

The Uwell Crown III is remarkably well built. The black color that I’m using has a really sleek look to it that goes well with any mod. The tank itself has a very solid feel, and the Uwell Crown III can definitely take a beating without breaking. It’s been dropped a couple of times, and there isn’t so much as a scratch on it. When I first got it I had a few problems with leaking, but once I cleaned it out and tightened everything back up it was perfectly fine.

The Uwell Crown III a features a 5.0ml capacity tank, and removable cap which you unscrew from the top. After unscrewing the top cap, you simply pour your desired juice into one of the two holes at the top of the tank. Done! I hated some other devices because they were too messy to fill, but the Uwell Crown III makes it really simple. That is something that I found very appealing about this vape, and I’m sure others will as well.

If you’re looking to disassemble and clean out your Uwell Crown III tank, you’re going to need the key that comes with it. After unscrewing the top cap, fit the Crown Key into the slot and turn clockwise. Take out the little disc that comes loose, and you can now disassemble the tank for cleaning.

The adjustable-airflow for the Uwell Crown III is on the bottom of the tank. Turning the bottom of the tank will allow you to adjust to the airflow to your desired draw. The Crown III seemed to work best with the airflow holes opened nearly all the way.

The bottom of the Crown III unscrews where the airflow is, which allows you to clean out the inside where small amounts of juice/condensation may collect. This also allows you to clean out the connection to your mods battery. With juice/condensation you can get degraded vaping performance.

Uwell Crown 3 Tank on a Mod


Performance & Vapor Quality

The Uwell Crown III performs extremely well and outputs large, satisfying clouds. The flavour that you get from the Crown III is on-point, and you can really taste the flavours of the juices that you vape. Compared to some other devices, the Uwell Crown III ranks near the top in terms of flavour and cloud output.

While I preferred to vape on the 0.25 Ω coil, the 0.5 Ω coil was just as good. I found the the 0.25 Ω coil worked best at around 90 Watts, while the 0.5 Ω coil did better around 75 Watts. While this is what I found worked for me, you can push the coils a little higher (around +20 Watts higher) without dulling the flavour. The vapor from the Uwell Crown III comes out a little bit warm on the 0.25 Ω coil, but nothing that wasn’t manageable unless you were taking huge draws.

The tank capacity was something that I found great, especially as a heavy vaper. Although the Crown III is super simple to fill, it’s even better because you don’t have to fill as often! Even when vaping on these sub-ohm coils at high wattage, I still found that a full tank of juice would usually last me through the day. Uwell receives a huge thumbs up for the large tank size.

Overall, I found the vaping experience with the Uwell Crown III to be top-notch, and I have been recommending this vape to those that I know in person. The large tank capacity, excellent flavour profiles, and satisfying cloud output are all reasons you should have the Crown III as part of your vape collection.


Final Verdict – Uwell Crown III Review 

When it comes to a dependable sub-ohm tank, the Uwell Crown III is up for the challenge. From the excellent build quality, to the amazing flavour and tank size, you can’t go wrong with the Crown III. If you’re thinking of picking up your first tank, or looking to add one to your collection, the Crown III won’t disappoint you. It performs as good as it looks, and it looks super good. I found the taste to be much better than any of the other tanks I’ve tried, and although the Crown III came out last year it’s still the tried and true of sub-ohm tanks.

Now It’s Available :Uwell Crown 3 Sub-Ohm tank

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

Leave a Reply

Your email address will not be published. Required fields are marked *